I have finally finished the VW bug’s console. I welded the shifter mounts and the e-brake mounting bolts and I am now ready to reinstall the assembly back between the seats.
Finally finish the VW bug center console construction #325
3
Tag Archives: rolling chassis
Need to cut and weld the VW bug console #324
With the MR2 shifter and park brake handle in place, I can finish cutting and welding the VW bug’s main console assembly.
Finish initial construction on the VW console #323
With the VW bug shifter tacked into place, I can locate and attach the e-brake mechanism. I clamped it in place and then drilled and bolted it to the console. I again remounted the console back into the car and tested the function.
Locate and tack on the MR2 shifter #322
With both of the console tubes in place and welded together, I can try and place the MR2 shifter mechanism. I cut it down to minimize it. I then sat in the car and tested the comfort and then tacked it in place.
Building the VW center console #321
After some thought, I am now embarking on a plan for the center console. It will consist of 2-3×3 tubes welded together. The shifter will be placed somewhere towards the end of the top tube. 1st I need to bolt the bottom tube to the main seat brackets
I now have a new slide show on the new “MR2 VW Bug pics page 6” page
I now have a new slide show on the new “MR2 VW Bug pics page 6” page. MR2 VW bug pics page 6
Work on center console locate shifter #320
Work on the center console continues. I am trying to determine where the MR2 shifter and parking brake handle will be located as well as how to build the console itself. My plan is to use 2 3×3 inch steel tubes with the top tube longer than the bottom one. The top tube will be longer so that I will have a little play on where to mount the shifter.
Work on vw shifter and E-brake handle #319
I now have the shifter cables in their correct location and will probably have to lengthen the cables. I have also partially mounted the e-brake cable. You will see that I will have to change this later.
Plan out shift cables through VW rear fire-wall #318
With the radiaor mounts finished, I am now working on the VW bug shifter. The shifter will need to penetrate the rear fire wall to enter the passenger cabin. I am using a cardboard cutout to determine where the hole should be. I first made the template to fit in the firewall and then moved it to the rear motormount to find the hole location. I can then move it back to cut out the hole.
Finish condenser brackets, more planning #317
The VW bug’s radiator and condenser is now in place. There are a few more items to complete before I can start tearing everything down to paint the frame such as the shifter and parking brake assemblies.