The front wiring harness has now been wrapped and installed and most of the connectors have been connected. I have also finished mounting the fuse box and the battery box is close. I am spraying bed liner on the inside of the battery box before I reinstall it. All and all the front of the VW turbo bug is close to bring finished.

Focus returns to the front wiring loom. I have basically mounted all of the electrical boxes and have run the wires to them. I have all the wires tied up in various running groups to try and minimize the wire bundles. The fuse box has also been mounted. Getting closer to finishing the front end of the VW bug.

I am still working on the VW bug’s front nose electrical but I got my gas filler neck in and I want to install it. I cut the tube from the neck and affixed it ti the mounting plate and decorative cover. I then bolted it up where it needs to be and welded the new neck to the cap unit. I think the gas cap will look really good on the side of the bug.

With the VW bug’s front plumbing complete, I can now concentrate on the wiring. Luckily I have the complete Toyota MR2 service/wiring manual set to determine what everything is. I need to determine where all of the boxes need to be (ECUs, Relays etc.) and how to route the correct wires to their locations. The length of the harness will establish the location of each box. Did I mention “concentration”.