With both of the console tubes in place and welded together, I can try and place the MR2 shifter mechanism. I cut it down to minimize it. I then sat in the car and tested the comfort and then tacked it in place.
After some thought, I am now embarking on a plan for the center console. It will consist of 2-3×3 tubes welded together. The shifter will be placed somewhere towards the end of the top tube. 1st I need to bolt the bottom tube to the main seat brackets
I now have a new slide show on the new “MR2 VW Bug pics page 6” page. MR2 VW bug pics page 6
Work on the center console continues. I am trying to determine where the MR2 shifter and parking brake handle will be located as well as how to build the console itself. My plan is to use 2 3×3 inch steel tubes with the top tube longer than the bottom one. The top tube will be longer so that I will have a little play on where to mount the shifter.
I now have the shifter cables in their correct location and will probably have to lengthen the cables. I have also partially mounted the e-brake cable. You will see that I will have to change this later.
With the radiaor mounts finished, I am now working on the VW bug shifter. The shifter will need to penetrate the rear fire wall to enter the passenger cabin. I am using a cardboard cutout to determine where the hole should be. I first made the template to fit in the firewall and then moved it to the rear motormount to find the hole location. I can then move it back to cut out the hole.