Building custom cars in my backyard

The pedal mounting bracket templates are basically finished. All I need to do is to trace the profile on the 1/8" steel plate and cut them out. I will then put one bend in each bracket.

With the steering column bracket complete, I will need to create support brackets for the two main pedals. The clutch and the brake pedal will need strong support to keep them from moving around. I am planning on creating 2 brackets that will be attached to the steering column bracket. I am making them from [...]

The VW bug's MR2 steering column bracket is complete. It is very strong and I can hang from it with all of my weight. Now I have to start to get the pedals mounted. The brake and clutch pedals will be supported off of the steering column bracket.

Steering-column bracket construction continues. After creating all of the bends in the bracket I have reinstalled it and it fits good. I am now creating a strengthening member for the backbone which will be the basis for the other mounting brackets in the foot-box.

I can now create the VW bug's steering-column bracket from steel. Using my foam template I cut out a piece of 3/16" plate. There are 2 slight angle bends and 1 90 degree bend. There will be 6 bolts holding everything together.

I have now completed the main steering column support bracket template. This template has a fairly complex shape and I will need to take my time when I cut and bend the steel.

Now with everything located on the steel fire-wall, I can reinstall it. I am now working on the steering column mount. This mount will support the steering column and both of the main pedal mounts. First I must create the main mounting template before I can cut and fit the steel.